Press "Enter" to skip to content

How does an object behave when no unbalanced force is applied to it?

Balanced forces do not cause a change in motion. When balanced forces act on an object at rest, the object will not move. If you push against a wall, the wall pushes back with an equal but opposite force.

Can an object continue to move when an unbalanced force is removed?

Balanced forces do not change the motion of an object. The motion of an object will not change if the forces pushing or pulling the object are balanced. An object that is sitting still will stay still if the forces acting on it are balanced.

What happens to a moving object if the total force acting on it is zero?

According to Newton’s First Law of motion, an object remains in the same state of motion unless a resultant force acts on it. If the resultant force on an object is zero, this means: a moving object continues to move at the same velocity (at the same speed and in the same direction)

What if I push an object?

A force is any push or pull that causes an object to move, stop, or change speed or direction. The greater the force, the greater the change in motion will be. The more massive an object, the less effect a given force will have on the object. Energy may exist in two states: kinetic or potential.

Will the ball move by itself?

Answer: No! Explanation: Because In the first law of motion , an object will not change its motion unless a force acts on it.

What force causes balls to move?

of gravity

What keeps a ball moving?

When you roll a ball on the ground, the electrons in the atoms on the surface of the ground push against the electrons in the atoms on the surface of your ball that is touching the ground. A rolling ball stops because the surface on which it rolls resists its motion. A rolling ball stops because of friction.

What force is causing the objects to eventually stop moving?

Every day you see moving objects come to a stop. The force that brings nearly everything to a stop is friction,which is the force that acts to resist sliding between two touch- ing surfaces, as shown in Figure 3. Friction is why you never see objects moving with constant velocity unless a net force is applied.

Does a moving object have to have a force pushing or pulling on it to keep it moving explain?

No, a force is needed to keep an object moving at constant speed, but it doesn’t have to be a constant force. Yes, an object will move at constant speed unless a force acts to change its motion. Yes, an object will move at constant speed as long as the force inside the object doesn’t run out.

Did the cart speed up more quickly with the fan on low or medium?

Draw conclusion: Did the cart speed up more quickly with the fan on Lowor Medium ? It moved up more quickly with medium 5. Generalize: On Mediumthe fan provides more force than on Low.

How fast will the cart be moving at 12 seconds?

24 cm per second

What is the final speed of the cart?

2 Answers. For a perfectly elastic collision, the final velocities of the carts will each be 1/2 the velocity of the initial velocity of the moving cart. For a perfectly inelastic collision, the final velocity of the cart system will be 1/2 the initial velocity of the moving cart.

What pattern do you see in the position data after the fan is off?

pattern do you see in the position data after the fan is off? The position moves up on the graph at fast rate 3.

How can you increase the efficiency of an electric fan?

That means, if fan rotation speed is reduced by 10%, the fan power will reduce 27%. The most efficient way to reduce fan energy use in variable flow is to reduce fan rotation speed, which can be most efficiently achieved with frequency controlled electric motors.

Which cart is harder to push?

An empty grocery cart is easier to move because there is less mass in an empty cart compared to a full cart. Newton’s second law state that an object’s acceleration depends on the mass of the object and the force applied. Something with more mass will need a greater force to move it than something with less mass.

Why is it easier to push an empty cart than a cart full of groceries?

It is easier to push an empty shopping cart than a full one, because the full shopping cart has more mass than the empty one. This means that more force is required to push the full shopping cart.

What Newton’s law is pushing a cart?

A real life example of Newtons second law is a full shopping cart versus an empty shopping cart. In his law, Newton says that if two objects are pushed with the same force, the object with the greater mass will have a slower acceleration than the object with the less mass.